Trio-motion-technology MC403 Bedienungsanleitung

(Please refer to the Motion Coordinator Technical Reference Manual for Full Details)MOTION COORDINATOR MC403 / MC403-ZQuick Connection GuideMOTIONCOOR

MC 403This is a 5 way 3.5mm pitch connector. The connector is used both to provide the 24 Volt power to the MC403(-Z) and provide connections for I/O

SERIAL CONNECTIONSMC 403MC 403Serial ConnectorI/O CONNECTOR 1Input 6Input 5Input 7I/O 8I/O 9I/O 10I/O 11Input 3Input 4Input 2Input 1Input 0I/O 24VI/O

Aout0V100R100nF0VD to ACONVERTERAin0V22k22k30pFA to DCONVERTER0VI/O 24V must be applied to power the voltage outputs. (MC403 ONLY)or N/C = MC403-Zor N

An internal relay is used to enable external amplifi ers when the controller has powered up correctly and the system and application software are ready

MC 403STEPPER OUTPUTS / ENCODER INPUTS* Current limit is 150mA total, shared between all axes.Pin Servo Axis Stepper Axis Absolute Encoder1 Enc. A St

Ensure that:1. The shield screw is grounded as close to the MC403(-Z) as possible.2. 0V, V- and E- connections are NOT used for terminating screens.3

STATUS LED’SThe factory default IP address is 192.168.0.250. This can be changed using the ETHERNET or IP_ADDRESS commands via Motion Perfect. To retu